Temperature Changes
Record fresh-food and freezer temperatures plus the time the change began.
The Thermador Lineup
Thermador spans star-burner gas ranges and cooktops, Freedom induction, column refrigeration, and wall ovens. It shares engineering with the broader BSH family, which means its ovens and dishwashers often report faults with numeric codes, unlike the symptom-based diagnosis on some other luxury brands. Knowing which part of the line you own shapes what maintenance matters most.
The star burners are the brand's hallmark and need their ports kept clear; the induction tops need careful surface care; and the columns need the same condenser and gasket attention any built-in refrigerator does.
Keeping Thermador in Shape
For gas cooktops, clean the star-burner ports and caps so ignition stays reliable. For induction, use appropriate cookware and keep the glass clean and unscratched, since cracks and heat damage are the main enemies. For column refrigeration, clean the condenser and check seals like any built-in. For wall ovens, note that Thermador and its GE-era relatives use F-codes such as F1 through F7 for control, sensor, and over-temperature faults, so an on-screen code is a useful starting point for diagnosis.
When an oven shows a recurring F-code or a column drifts warm, book a diagnosis rather than resetting repeatedly. The code narrows the fault, and addressing it early avoids a bigger repair.
Quick Reference
Frost or Condensation
Photograph the exact location and check whether the door closes without interference.
Noise or Long Run Time
Describe when the sound starts and whether airflow or cooling has also changed.
Water or Ice Problem
Note filter history, supply flow, ice output, and the first visible point of moisture.
AN F-Code Is a Starting Point
A displayed F-code narrows the fault but does not always name the failed part on its own. Note the exact code and when it appears; it speeds up an accurate diagnosis.
Book a Repair with a Specialist
Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
Thermador Care FAQ
Do Thermador Ovens Show Error Codes?
Yes. Thermador and its GE-era relatives use F-codes such as F1 through F7 for control, sensor, and over-temperature faults, which help point a technician to the cause.
How Do I Care for a Thermador Induction Cooktop?
Use induction-compatible cookware, keep the glass clean, and avoid dragging heavy pans that can scratch it. Cracks and impact damage are the main faults on induction tops.
Why Is My Thermador Column Warm?
Like any built-in, a warm column usually points to a dirty condenser, a worn gasket, or a fan or defrost fault. Clean the coil first, and book a diagnosis if it stays warm.