How Cove Dries
Cove relies on heat and rinse aid to dry dishes, moving from the wash and rinse into a drying phase that evaporates moisture and vents it. When dishes come out wet, one of those elements is not doing its job: not enough rinse aid to sheet the water off, not enough heat, or moisture that cannot escape.
Plastics dry the least well in any dishwasher because they hold little heat, so a few damp plastic items alone is normal and not a fault.
What to Check
Start with rinse aid, since Cove depends on it for drying and a low reservoir is the most common cause of wet dishes. Next, look at loading: overcrowding or nesting items block the airflow that carries moisture away, and tall items can trap water. If rinse aid is full and loading is correct and dishes are still coming out uniformly wet, a venting fault or a heating problem in the drying system is the likely cause, which needs a technician.
Because there is no error code, we read the pattern, uniformly wet versus only plastics, to tell a real fault from normal behavior.
Cause Reference
| Symptom | Likely Cause | Action |
|---|---|---|
| All dishes wet | Low rinse aid or heating fault | Refill rinse aid, test heating |
| Only plastics wet | Normal behavior | No repair needed |
| Water pooled on cups | Loading blocks drainage | Reload with spacing |
| Wet after rinse aid full | Venting or heating fault | Diagnose drying system |
Rule Out Rinse Aid and Loading First
Most wet-dish complaints come down to low rinse aid or overloading. Refill the rinse aid and load with more space before assuming a heating or venting fault.
Book a Repair with a Specialist
Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.