The GE F-Series on Monogram
Monogram is GE's luxury line, so its ovens use the familiar GE F-series fault codes. That is helpful because the number narrows the problem before service. The codes group into control faults, over-temperature conditions, sensor faults, and stuck-key faults, and knowing the family tells you roughly what to expect.
Record the exact code and note when it appears, since the same displayed number can behave differently across model years.
What Each Code Means
F0 and F1 generally point to a control board fault, where the electronics are not functioning correctly. F2 indicates the oven exceeded a safe temperature, which can come from a stuck relay or a sensor fault and should not be ignored. F3 and F4 indicate the oven temperature sensor is reading open or shorted, so the control cannot get a valid temperature. F7 indicates a stuck touch key telling the control a button is pressed.
A one-time code may clear with a power reset at the breaker. A recurring F-code names a real fault, and the indicated part, control, sensor, or touch panel, should be tested and replaced.
Code Reference
| Code | Meaning | Typical Fix |
|---|---|---|
| F0 / F1 | Control board fault | Diagnose control |
| F2 | Oven over-temperature | Diagnose relay or sensor |
| F3 / F4 | Sensor open or shorted | Replace oven sensor |
| F7 | Stuck touch key | Service touch panel |
AN F2 Over-Temp Code Needs Attention
F2 means the oven ran hotter than safe. Because a stuck relay can keep it heating, do not ignore a repeated F2; have it diagnosed promptly.
Book a Repair with a Specialist
Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.